Customizing radial popup buttons in NX9

[rickemeyer]

I would like to know if there's a way to customize the radial popup buttons when you hold down Ctrl+Shift and hold down MB1, MB2 or MB3. I would like to customize all three radials if possible. For example, on the Ctrl+Shift+MB1 radial I never use Datum CSYS, Draft, Hole or Revolve. I would like to replace them with Remove Parameters, Move Component, WCS Origin and Measure Distance. I would also like to fill up the empty spots on the Ctrl+Shift+MB1 menu. Thanks for your time!

Rick

 

[kapmnit123]

Hi ,
it might help you.
Step 1
kapil

 

[kapmnit123]

step 2

 

[rickemeyer]

That's it! Thank you so much!