Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Custom Tool in drilling cycles?

Status
Not open for further replies.
TheeCircle

TheeCircle

Civil/Environmental
Joined
Sep 5, 2013
Messages
149
Location
CA
Is it possible to use a custom tool in a drilling cycle?

Thanks in advance!
 
Sort by date Sort by votes
look at the hole_making tools
you should find your happiness
 
Upvote 0 Downvote
Hi,

Will the proper shape of the tool be shown in verify and simulation?

Thanks

John

 
Upvote 0 Downvote
The parametric shape of the tool, shank, and holder is shown, even for user defined milling tools.
Optionally, library tools can have part file assemblies than can be shown instead.

Mark Rief
NX CAM Customer Success
Siemens PLM Software
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Kenja824
  • Question Question
NX2406 - Flatten and Forming Tool Not Projecting all the points
Replies
1
Views
6K
Carbonated
Carbonated
AlexMCA
  • Locked
  • Question Question
NX Custom Background/GUI
Replies
1
Views
2K
Toost
Toost
nyang
  • Locked
  • Question Question
NX custom keys for resource bar
Replies
0
Views
447
nyang
nyang
rafi22
  • Locked
  • Question Question
creating hotkeys /shortcut key for userdefined custom view
Replies
0
Views
1K
rafi22
rafi22
K
  • Locked
  • Question Question
Sew: tool does not share a common boundary
Replies
3
Views
2K
cowski
cowski

Part and Inventory Search

Sponsor

Back
Top