Kuldipkenya
Electrical
I am looking to build my own curing oven.Where can i get the plan or drawings.I will be using it to cure electric motors.
Thanks
Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
CURING OVEN 2
- Thread starter Kuldipkenya
- Start date
- Status
-
1
- #3
-
1
- #4
I second the above post by Dtuck that it is better to purchase one than try to built it yourself.
If you will look on the surplus market you will find about anything you want in the range of curing ovens. I have been involved in several purchases of used equipment and have been quite pleased with the products. We have just bought some surplus ovens and spray booths (new) that are brand new. The price was about 1/3 the quoted price from the manufacturer.
Here is one of many out there. It is best to call any surplus site with your requirements.
If you will look on the surplus market you will find about anything you want in the range of curing ovens. I have been involved in several purchases of used equipment and have been quite pleased with the products. We have just bought some surplus ovens and spray booths (new) that are brand new. The price was about 1/3 the quoted price from the manufacturer.
Here is one of many out there. It is best to call any surplus site with your requirements.
- Status