I am recreating the CSVGN1 static var compenator model from PSS/E into EMTP. The input to the block is the bus voltage and the putput is suscpetance B. I need to use this susceptance to vary the bus voltage depending on the change in the bus voltage according to reference voltage. How do I use the B in EMTP and change the bus voltage?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
CSVGN1 generator dynamic model in EMTP
- Thread starter mplusm
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Question