Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

CSA Z 245.15 Valves Wall thickness

Status
Not open for further replies.
MoReSo

MoReSo

Mechanical
Joined
Apr 16, 2013
Messages
21
Location
CA
Hello,

Does CSA Z 245.15 have wall thickness requirement for valve body? does it refer to ASME B 16.34 or any calculation?
please help me through this.

MRSohrabi;
Materials and Welding Eng.
 
Status
Not open for further replies.

Similar threads

mrmalcolm
  • Locked
  • Question Question
Half thickness tensile specimen retaining one rolled surface
Replies
2
Views
3K
mrmalcolm
mrmalcolm
Johnwoo1991
  • Locked
  • Question Question
EN 20898 8.8 bolting (for ped valves)
Replies
0
Views
249
Johnwoo1991
Johnwoo1991
S Jana
  • Locked
  • Question Question
For P275 NL2 material with a plate thickness greater than 40 mm, Post Weld Heat Treatment (PWHT) requirements
Replies
0
Views
1K
S Jana
S Jana
breezy83
  • Locked
  • Question Question
Brittle Diecast Zinc (ZA8)
Replies
1
Views
2K
mfgenggear
mfgenggear
insider79
  • Locked
  • Question Question
Wall thickness calculation of ASME B 16.9
Replies
1
Views
285
david339933
david339933

Part and Inventory Search

Sponsor

Back
Top