Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cryogenic Treatment of Materials
- Thread starter weed78
- Start date
Yes. The rate of decrease of temperature in true cryogenic processing should be slow. Dunking the part in liquid creates a very fast decrease in temperature which causes micro cracks or even macro cracks. Research out of Russia indicates that metals treated by dunking have only a ten percent chance of increased wear resistance.
- Status
Similar threads
- Locked
- Locked
- Question
- Locked
- Question