CRSI publication: REINFORCING BAR DETAILING

[Ingenuity]

For any one that owns or has access to the CRSI publication "REINFORCING BAR DETAILING", may I ask if the document has a chart of standard bar shapes (similar to the following) or if there is another CRSI (or other US-based document) that details any industry-standard reinforcing bar shapes/codes. Looking for building structures, not bridges:

EU, AU and BS all seem to have industry-standard shape codes, but cannot find one for the US. Maybe one does not exist!

Thank you.

 

[BAretired]

There is an ACI standard. See the following:

https://images.search.yahoo.com/yhs...m/img/Products/rebar%20bends.gif&action=click

BA

 

[BAretired]

Also the following, see page 305-29 to 33:

https://vannpiseth.files.wordpress.com/2010/10/aci_reinf_details.pdf

BA

 

[bridgebuster]

I don't have the "REINFORCING BAR DETAILING" but the 2008 CRSI Design Manual doesn't have any diagrams. I also looked at the 2004 ACI Detailing Manual, which has bar bends but no designations. I compared those with some plan sets and no correlation.

 

[WARose]

I have a publication from CRSI called 'Manual of Standard Practice'. It's a thin, red paperback book. (This one is from October 1998. Second Printing.) It has a chart similar to what you post here (and very similar to what BARetired posted). IIRC, it came with the CRSI 'Design Handbook'.

This chart has a few more shapes that it doesn't have actually. For example, it doesn't have your "Shape Code 35".

Sorry for the dated info.....but I hope it helps.