jtkelly913
Civil/Environmental
Is there a standard for tabulating the square footage of a cross walk or do you just add up the area of the individual stripes along the crossing?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cross Walk Striping Tabulation
- Thread starter jtkelly913
- Start date
- Status
ACtrafficengr
Civil/Environmental
The specification you are using should spell it out. For example, New York State DOT measures crosswalks and stop lines in terms of the equivalent length of 4" wide stripe, so a 1' x 24' crosswalk line would be 72 linear feet.
- Status
Similar threads
- Locked
- Question
- Locked
- Question