I have a problem with my cross seam welder. I'm welding 0.3mm stainless steel. I am getting a good weld except for its leaving what I call a "pixie hair". At the end of th e weld it seems to pull the tiniest amount of material out and leaves this hair on the part. I have tried many things with no effect. Does anyone have any suggestions.Thanx Matt
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
cross seam welding
- Thread starter comic
- Start date
Similar threads
- Solved
