Nov 10, 2006 #1 solcool Electrical Joined Nov 9, 2006 Messages 4 Location IL what size of a cross flow fan require to generate 1300 CFM on 24 volt DC from an A/C box or what is the formula. Joe
what size of a cross flow fan require to generate 1300 CFM on 24 volt DC from an A/C box or what is the formula. Joe
Nov 12, 2006 1 #2 willard3 Mechanical Joined Jan 14, 2006 Messages 1,437 Location US What do you mean by a "cross flow" fan? Do you mean a centrifugal fan with non-axial flow? Upvote 0 Downvote
Nov 12, 2006 Thread starter #3 solcool Electrical Joined Nov 9, 2006 Messages 4 Location IL I mean Air Wheel or sleave fan or Air Curtain long and nerrow Upvote 0 Downvote
Nov 12, 2006 #4 ScottyUK Electrical Joined May 21, 2003 Messages 12,915 Location DE willard, http://www.air-con.co.uk/products_uk_ebm_papst.asp about 2/3 of the way down. Yes, they are a variety of centrifugal fan. ---------------------------------- Sometimes I only open my mouth to swap feet... Upvote 0 Downvote
willard, http://www.air-con.co.uk/products_uk_ebm_papst.asp about 2/3 of the way down. Yes, they are a variety of centrifugal fan. ---------------------------------- Sometimes I only open my mouth to swap feet...
Nov 12, 2006 #5 willard3 Mechanical Joined Jan 14, 2006 Messages 1,437 Location US There is really no formula for fan sizes. There are many fan blade types (radial, backward inclined, forward curved, axial and etc) depending upon the use for the fan. Fan laws are here: http://www.rotronmilaero.com/fanLaws.cfm Upvote 0 Downvote
There is really no formula for fan sizes. There are many fan blade types (radial, backward inclined, forward curved, axial and etc) depending upon the use for the fan. Fan laws are here: http://www.rotronmilaero.com/fanLaws.cfm
Nov 12, 2006 #6 AbbyNormal Mechanical Joined Nov 17, 2003 Messages 780 Location KY tying to clone an LG ductless split? They run on about 30VDC Take the "V" out of HVAC and you are left with a HAC(k) job. Upvote 0 Downvote
tying to clone an LG ductless split? They run on about 30VDC Take the "V" out of HVAC and you are left with a HAC(k) job.
Nov 23, 2006 #7 stanlsimon Mechanical Joined Feb 14, 2005 Messages 177 Location US There are probably some theoretical formulas for fan air flow. However the fan manufacturer's literature is the place to start. You need to know how much air you want to move and what static pressure rise the fan is required to develope. Upvote 0 Downvote
There are probably some theoretical formulas for fan air flow. However the fan manufacturer's literature is the place to start. You need to know how much air you want to move and what static pressure rise the fan is required to develope.