I am developing a gauge that has a chromed metallic bezel. The problem is how to do the crimping. The bezel is made of CuZn 37F30 DIN 1652 (European). The solution will be used for small-scale production. Has anyone developed a crimping method? I would appreciate some guidance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Crimping bezel
- Thread starter DC2012
- Start date
Similar threads
- Locked
- Question