Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Creo Parametric R 2.0 - Changing scroll wheel zoom direction

Status
Not open for further replies.

jeffatmines

Mechanical
Joined
Aug 25, 2009
Messages
29
Location
US
I recently started a new position at a company using Creo Parametric R 2.0. This is my first exposure to Creo Parametric or anything from PTC other than MathCAD; I have formerly used Solidworks and CATIA V5. Is there a way in Creo to change the direction the scroll wheel zooms in and out? I've asked around and no one around the office seems to know. I figured the Creo Simulate forum would be a good place to start. I'm posting this in the Pro/Eingineer forum as well since there isn't a forum for Creo Parametric yet. Thanks in advance!

Jeff Parham
Colorado School of Mines '09
Mecahnical Design Engineer
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top