Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Creation of part family includes array of a component in the assembly

Status
Not open for further replies.
prashantdale

prashantdale

Mechanical
Joined
Jul 14, 2013
Messages
1
Location
IN
i have created an assembly which includes an array of bolts
now i wants to create a part family which will then drives tha array as well

somehow i am not able to create apart family

the error comes as "Array axis is invalid. Component array - HEX CAP SCREW"

prashant dale
 
Status
Not open for further replies.

Similar threads

CAD2015
  • Question Question
Convert components from an assembly into one single part.......
Replies
5
Views
4K
CAD2015
CAD2015
s_hightower
  • Locked
  • Question Question
NX Assembly Part Family
Replies
1
Views
792
Werner K
Werner K
nyang
  • Question Question
Moving body from part back to assembly level part
Replies
3
Views
12K
Toost
Toost
A
  • Locked
  • Question Question
NX10. Assembly Navigator. Column with freeze status of component
Replies
3
Views
1K
cowski
cowski
P
  • Locked
  • Question Question
Part Family Siemens NX & TC synchro issue
Replies
1
Views
1K
Piotrek947
P

Part and Inventory Search

Sponsor

Back
Top