Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

creating non planar area in ANSYS

Status
Not open for further replies.
mohamm21

mohamm21

Automotive
Joined
Jan 23, 2003
Messages
10
Location
GB
Hi,

i created a non planar area (coons patch) in ANSYS. now i want add it to the other areas.But it gives an error in ANSYS. can anyone help me out about how to model a create a Curved area for a 3D model

Thank You

Quadris
 
Status
Not open for further replies.

Similar threads

H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
H
  • Locked
  • Question Question
Plasticity behaviour is not being computed in a non-linear analysis in ANSYS Mechanical APDL 2024 r2
Replies
0
Views
2K
hmsilva
H
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
V
  • Locked
  • Question Question
Boundary conditions and post processing for Planar tension test
Replies
0
Views
598
vsw
V
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X

Part and Inventory Search

Sponsor

Back
Top