Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Creating an unexplodable block

  • Thread starter Thread starter Alban
  • Start date Start date
Status
Not open for further replies.
A

Alban

Guest
Hi,
I found in the Block creation dialog box, there is a radio button for "allow exploding". This is great, We have a LOT of blocks that I would like to set as not explodable. What I would like is to be able to modify that parameter for the existing blocks. I looked in the new Block Editor and nothing there. Any suggestions.
Thanks.
 
Hi,
You can do it through the Block dialog. Select block name from the drop down list and uncheck "Allow exploding" checkbox. You also have to click on "Retain" radio button to make sure you don't insert it again on the drawing.
Cheers!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top