Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Creating a analytical surface with rigid body in Abaqus profile of Hypermesh

Status
Not open for further replies.
gregf84

gregf84

Mechanical
Joined
Feb 20, 2013
Messages
34
Location
US
Hello,
Does anyone know how to create an analytical surface with a rigid body (made from a flat plane rectangular patch of shell elements) for the Abaqus profile in Hypermesh? In other words, I want to create a rigid plane to attach a bolt to in an Abaqus model which I am creating in Hypermesh version 13. But I do not know how to do this.

Greg........
 
Status
Not open for further replies.

Similar threads

Nir_k
  • Locked
  • Question Question
How to select both the exterior and interior surfaces (All Entities) of an element when creating surfaces in Hypermesh?
Replies
0
Views
2K
Nir_k
Nir_k
Max121
  • Locked
  • Question Question
"Exporting mesh hypermesh to ansys
Replies
0
Views
723
Max121
Max121
Beider
  • Locked
  • Question Question
Modeling HDPE with upper and lower yield points and >300% strain - RADIOSS
Replies
1
Views
726
hiper_88
hiper_88
Radius1
  • Locked
  • Question Question
Mouse Wheel Zoom Direction for Hypermesh
Replies
0
Views
569
Radius1
Radius1
flyforever85
  • Locked
  • Question Question
How can I keep the same Components in Hypermesh and Hyperview
Replies
0
Views
658
flyforever85
flyforever85

Part and Inventory Search

Sponsor

Back
Top