Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Create Executables from journals 3
- Thread starter cquinker
- Start date
- Thread starter
- #2
-
1
- #3
-
2
- #5
cquinker,
(assuming that Visual Studio or Visual Studio Express is installed)
From an "NX 75 Command Prompt" window...
The "/t:library" will generate a dll file (as opposed to an exe) which is probably what you want if you will be running the "journal" in an interactive NX session - perhaps from a custom toolbar.
HTH,
Joe
(assuming that Visual Studio or Visual Studio Express is installed)
From an "NX 75 Command Prompt" window...
Code:
vbc /libpath:"%UGII_ROOT_DIR%\managed" /t:library /r:NXOpen.dll /r:NXOpen.Utilities.dll /r:NXOpen.UF.dll /r:NXOpenUI.dll/resource:"%UGII_BASE_DIR%\ugopen\NXSigningResource.res" "the_journal_to_compile.vb"
"%UGII_BASE_DIR%\ugii\SignLibrary.exe" "the_journal_to_compile.dll"The "/t:library" will generate a dll file (as opposed to an exe) which is probably what you want if you will be running the "journal" in an interactive NX session - perhaps from a custom toolbar.
HTH,
Joe
moosaviamir
Industrial
- Nov 26, 2012
- 9
Dear jpetach
i am using NX 8.5 and visual studio 2012 is installed. where is NX command prompt to do that?
i am using NX 8.5 and visual studio 2012 is installed. where is NX command prompt to do that?
moosaviamir
Industrial
- Nov 26, 2012
- 9
Dear jpetach
NX 8.5 command prompt does not recognize vbc as a valid command!
NX 8.5 command prompt does not recognize vbc as a valid command!
Moosaviamir,
The most likely reason is that MSvcDir environment variable is not defined or the variable is not pointing to the correct directory.
When the NX shortcut "All Programs, Siemens NX8.5, NX Tools, NX Command Prompt" executes the ugiicmd.bat script, the script invokes %ugii_base_dir%\ugopen\ufvars.bat script which expects to use the MSVCDir environment variable to set the path for MS Visual Studio compilers. If the MSvcdir variable is not set there is a short message about ufvars.bat issued in the command shell window. If the the variable is correctly set the feedback from the ufvars.bat will almost completely fill the command shell window.
HTH,
Joe
The most likely reason is that MSvcDir environment variable is not defined or the variable is not pointing to the correct directory.
When the NX shortcut "All Programs, Siemens NX8.5, NX Tools, NX Command Prompt" executes the ugiicmd.bat script, the script invokes %ugii_base_dir%\ugopen\ufvars.bat script which expects to use the MSVCDir environment variable to set the path for MS Visual Studio compilers. If the MSvcdir variable is not set there is a short message about ufvars.bat issued in the command shell window. If the the variable is correctly set the feedback from the ufvars.bat will almost completely fill the command shell window.
HTH,
Joe
- Status
Similar threads