Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cracking model for concrete -> Cracking model quantities -> CRACK - how to visualize

Status
Not open for further replies.
Lisu89

Lisu89

Civil/Environmental
Joined
Sep 22, 2014
Messages
1
Hello.

I want to visualize crack orientations.
I've already requested output of CRACK variable to file.
Is there any simple way to do that? (e.g. 3rd part postprocesor)

Thomas
 
Status
Not open for further replies.

Similar threads

D
  • Question Question
(ABAQUS) Earlier Failure and Unrealistic Cracking of Reinforced High Strength Concrete Beam Under Bending Simulation
Replies
4
Views
15K
Daniel_LEE
D
D
  • Locked
  • Question Question
How to model a 2-node beam element
Replies
1
Views
1K
FEA way
FEA way
P
  • Locked
  • Question Question
Abaqus two material model
Replies
2
Views
2K
payal.verma1989
P
Vishakh_Rajendran
  • Question Question
Crack Initiation Criterion for orthotropic materials
Replies
2
Views
2K
Vishakh_Rajendran
Vishakh_Rajendran
S
  • Question Question
EQUATIONS TO FIND YOUNGS MODULUS,CONCRETE DAMAGE PLASTICITY PARAMETERS FOR STEEL FIBRE REINFORCED CONCRETE
Replies
4
Views
8K
Shreyas M
S

Part and Inventory Search

Sponsor

Back
Top