Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Crack Width Check for foundation

Status
Not open for further replies.
melsawaf

melsawaf

Structural
Joined
Dec 17, 2014
Messages
30
Location
EG
Dear all

I have a strip footing with membrane waterproofing,seawater level is under the footing by 0.2 m .
Which allowable ic ACI224 table 4.1 to be considered 0.15 for sea water or 0.41 for protective membrane ??

 
Status
Not open for further replies.

Similar threads

Matt Carter
  • Locked
  • Question Question
Width of slab integral with beam
Replies
4
Views
1K
Matt Carter
Matt Carter
AndreiSal
  • Locked
  • Question Question
Standarts for road construction in tropical areas
Replies
0
Views
1K
AndreiSal
AndreiSal
mjhaveri
  • Locked
  • Question Question
ACI 318-19 Shear reinforcement design for Piles
Replies
0
Views
2K
mjhaveri
mjhaveri
onealmond1
  • Locked
  • Question Question
Hairline Cracked Concrete Upheaval after 4-6 days.
Replies
6
Views
1K
TigerGuy
TigerGuy
Phatt
  • Locked
  • Question Question
minimum reinforcement for column
Replies
4
Views
3K
WesternJeb
WesternJeb

Part and Inventory Search

Sponsor

Back
Top