Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Crack propagation analysis version 6.4 vs version 6.6.3 ABAQUS

Status
Not open for further replies.
doubleje

doubleje

Mechanical
Joined
May 25, 2006
Messages
9
Location
FR
Does anyone known why the Crack propagation analysis can't be performed using the *VISCO procedures in version 6.6.3 but this can be done with version 6.4 ? It's a only backwardness ? :D

( ABAQUS Analysis User's Manual - 7.10.3 Crack propagation analysis )

Thanks
 
Status
Not open for further replies.

Similar threads

Minhajul_Bari
  • Locked
  • Question Question
Crack Propagation Analysis of Masonry Infill
Replies
3
Views
369
FEA way
FEA way
jorge0894
  • Locked
  • Question Question
Restart analysis in Abaqus Explicit Error
Replies
3
Views
3K
FEA way
FEA way
R
  • Locked
  • Question Question
Creep Analysis in Abaqus
Replies
3
Views
3K
FEA way
FEA way
P
  • Locked
Information about Mapping Stress from one simulation result to another geometry ( which is a trimmed version of previous geometry)
Replies
2
Views
2K
FEA way
FEA way
vikram manoj
  • Question Question
Abaqus-Isight
Replies
5
Views
17K
snow83
S

Part and Inventory Search

Sponsor

Back
Top