ravindranathan
Electrical
How is rotating load coupled with rotating motor shaft?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Coupling of rotating load with rotating motor
- Thread starter ravindranathan
- Start date
- Status
BrianPetersen
Mechanical
Shaft coupling
Chain and sprockets
Toothed timing belt and sprockets
V-belt and pulleys
Flat belt and pulleys
Universal joints
Friction clutch
Torque converter
More information = better answers ...
Chain and sprockets
Toothed timing belt and sprockets
V-belt and pulleys
Flat belt and pulleys
Universal joints
Friction clutch
Torque converter
More information = better answers ...
Typically with some sort of flexible coupling, like this one
The two hubs are attached to the shafts (which are often provided with slots for woodruff keys,or splined) and the elastomeric material in between takes up the misalignment (within limits!)
A.
The two hubs are attached to the shafts (which are often provided with slots for woodruff keys,or splined) and the elastomeric material in between takes up the misalignment (within limits!)
A.
- Status
Similar threads
- Question
- Question
- Locked
- Question