Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
counter weight calculations for crankshafts
- Thread starter willeng
- Start date
motorsportsdesign
Automotive
There is no one ideal CW weight for a V8 crankshaft. The best configuration for your application depends on several variables that are often dictated by the space in your block more than anything else.
If you will describe the application, I can give you some guidance.
If you will model your crankshaft in 3D solids you should be able to design a crankshaft that will not need to be put on a balancing machine.
If you need a 3D model let me know, I may be able to help.
Jonathan T. Schmidt
If you will describe the application, I can give you some guidance.
If you will model your crankshaft in 3D solids you should be able to design a crankshaft that will not need to be put on a balancing machine.
If you need a 3D model let me know, I may be able to help.
Jonathan T. Schmidt
- Status
