Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

CosmoWorks advanaced professional

Status
Not open for further replies.

rlara

Mechanical
Joined
Jun 17, 2002
Messages
37
Location
US
Hi all:

Has anyone used CosmoWorks advanaced professional?. This packedge includes CosmoWorks and GeoStar. I currently use CosmoWorks but have the need to do Linear Dynamic analysis (e.g. Frequency response, random vibration analysis, etc.)for this I would have to up grade to Advance professional. I am trying to decide between upgrading or buying other software like Algor...

Any thoughts

Thanks
 
My thoughts.... after having dealt with quite a few people that switched over to cosmosWorks FROM algor... i would say stick with Cosmos... Here is a link to some product info just in case you would like to read it..

ftp://ftp.srac.com/Web/pdfs/prodBrocs/Works.pdf

CW, and Geostar are very capable packages... and of course geostar takes things a lot further that CWorks...

hope that helps a little



Regards,
Jon
jgbena@yahoo.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top