Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cosmos FloWorks Heatsink Simulation

Status
Not open for further replies.
av8rnut

av8rnut

Computer
Joined
Jan 27, 2003
Messages
1
Location
US
In a large electronics assembly I have over 20 heatsinks which results in a huge number of cells. I want to do heatsink simulations to replicate them but the option is "grayed out". Can I do a simulation on multiples or only single heatsinks?
 
Status
Not open for further replies.

Similar threads

A
  • Locked
  • Question Question
Flow simulation evaporative cooling
Replies
0
Views
907
arimaulanar
A
IdanPV
  • Locked
  • Question Question
Apply Moments in Solidworks Simulation
Replies
2
Views
2K
IdanPV
IdanPV
Joel_Lapointe
  • Locked
  • Question Question
Cylindrical coordinate system shear stresses for SolidWorks Simulation?
Replies
0
Views
1K
Joel_Lapointe
Joel_Lapointe
lpresciuttini
  • Locked
  • Question Question
Pressure Vessel Linearization (Simulation): Invalid points
Replies
1
Views
1K
IdanPV
IdanPV
Joel_Lapointe
  • Locked
  • Question Question
Impose mesh coordinates multiple different simulations (SolidWorks Simulation)
Replies
2
Views
1K
Joel_Lapointe
Joel_Lapointe

Part and Inventory Search

Sponsor

Back
Top