Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Corrosion of Galvanized Steel in Soil

Status
Not open for further replies.

Hammer335i

Structural
Joined
Jan 25, 2011
Messages
21
Location
US
I found this thread:


and I am looking for this reference:

M. Romanoff, Underground Corrosion, National Bureau of Standards Circular 579, 1957

Any ideas on where I can find it? I am looking to obtain corrosion rates of galvanized steel in soils. If anyone has other suggestions it would be much appreciated.

Thanks in advance!
 
NACE Corrosion Engineers Reference Book, 3rd Edition, page 190; or going to their source: Zinc, Its Corrosion Resistance, 2nd edition, page 101, International Lead Zinc Research Organisation, 1983

Steve Jones
Corrosion Management Consultant


All answers are personal opinions only and are in no way connected with any employer.
 
Rconner: I had previously found that circular but it was the wrong one, it deals with magnetism. I did some research on google scholar and found it located here:


This thread can be closed and archived since I have answered my own question and hopefully someone can use this in the future!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top