Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

corrosion in the cooling channel

Status
Not open for further replies.
alexcc52

alexcc52

Mechanical
Joined
Sep 3, 2002
Messages
1
Location
HK
Dear all,

I know Class 101 mold need to do the plating or inserting to the cooling channel to preventing the corrosion in the cooling line. Do anyone have the information about how to do it in the State or Asia? Or sourcing about this issue. I am the mold maker in Singapore.

Thanks in advance.

Alex
 
Status
Not open for further replies.

Similar threads

Buckshott00
  • Locked
  • Question Question
Process Setting for Improved Over-molding to prevent delamination In Molded Hytrel
Replies
0
Views
959
Buckshott00
Buckshott00
Splint
  • Locked
  • Question Question
Rotomolding materials suppliers in Australia - small quantities
Replies
0
Views
807
Splint
Splint
titan0106
  • Locked
  • Question Question
unidentified liquid rsidual on the surface of connectors (PA66+30GF injection molded)
Replies
1
Views
962
Pud
Pud
Tegguy
  • Locked
  • Question Question
Creep in 3D printed Nylon
Replies
12
Views
2K
Tegguy
Tegguy
mah1975
  • Locked
  • Question Question
Some bubbles get popped in the forming roller after extrusion of the bubble-wrap
Replies
1
Views
747
Mykolaj
Mykolaj

Part and Inventory Search

Sponsor

Back
Top