Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

corrosion in the cooling channel

Thread starter alexcc52
Start date Sep 3, 2002

Status: Not open for further replies.

Sep 3, 2002

alexcc52

Mechanical

Dear all,

I know Class 101 mold need to do the plating or inserting to the cooling channel to preventing the corrosion in the cooling line. Do anyone have the information about how to do it in the State or Asia? Or sourcing about this issue. I am the mold maker in Singapore.

Thanks in advance.

Alex