Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

corrosion allowance

Status
Not open for further replies.
CRG

CRG

Mechanical
Sep 28, 2002
512
For a facility, without cathodic protection, buried gas piping, B31.3 design, when must a corrosion allowance be considered? Where does the often-used .063 in corrosion allowance come from?
 
Status
Not open for further replies.

Similar threads

UJJ
  • Question
Subsea Pipeline(DNV) Repair, Maintenance, corrosion prevention method
Replies
4
Views
2K
UJJ
UJJ
PagoMitch
  • Locked
  • Question
CHW Closed Loop Piping Corrosion - How much is too much? 1
Replies
8
Views
446
Heaviside1925
Heaviside1925
Hayms
  • Locked
  • Question
Induction Bend Thinning Allowance ASME B31.4/B31.8/B16.9
Replies
3
Views
445
SJones
SJones
sftyvlv1
  • Locked
  • Question
Corrosion of heat affected zone.
Replies
7
Views
353
EdStainless
EdStainless
VikasP
  • Locked
  • Question
Corrosion between 2 different materials
Replies
6
Views
346
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top Bottom