Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

corrosion allowance

Status
Not open for further replies.
CRG

CRG

Mechanical
Joined
Sep 28, 2002
Messages
512
Location
US
For a facility, without cathodic protection, buried gas piping, B31.3 design, when must a corrosion allowance be considered? Where does the often-used .063 in corrosion allowance come from?
 
Status
Not open for further replies.

Similar threads

UJJ
  • Locked
  • Question Question
Subsea Pipeline(DNV) Repair, Maintenance, corrosion prevention method
Replies
4
Views
2K
UJJ
UJJ
PagoMitch
  • Locked
  • Question Question
CHW Closed Loop Piping Corrosion - How much is too much?
Replies
8
Views
616
Heaviside1925
Heaviside1925
Hayms
  • Locked
  • Question Question
Induction Bend Thinning Allowance ASME B31.4/B31.8/B16.9
Replies
3
Views
589
SJones
SJones
sftyvlv1
  • Locked
  • Question Question
Corrosion of heat affected zone.
Replies
7
Views
532
EdStainless
EdStainless
VikasP
  • Locked
  • Question Question
Corrosion between 2 different materials
Replies
6
Views
493
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top