mil21ochoa
Mechanical
is the 1/8" corrosion allowance for pressure tanks standard or where can i find how to calculate?
thanks ......
thanks ......
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
corrosion allowance in tanks
- Thread starter mil21ochoa
- Start date
- Status
Yes, 1/8" is standard for all tanks, pressurized or not, regardless of material of construction, product contained, operating temperature, and desired useful life. Unless the tank is painted purple. Then you can drop the corrosion allowance to 1/10".
Is this a homework question?
Is this a homework question?
That would be a first. I mean a homework question considering corrosion. Although basic, its far too practical to be homework.
**********************
"The problem isn't finding the solution, its trying to get to the real question." BigInch
**********************
"The problem isn't finding the solution, its trying to get to the real question." BigInch
- Status
Similar threads
- Locked
- Question
- Locked
- Question