Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Copy Revision Table to ALL pages

Status
Not open for further replies.

D3sign3r

Civil/Environmental
Joined
Aug 21, 2003
Messages
84
Location
CA
Is there a way to copy the revision table on the first page of my drawing to all the pages of my document without having to re-type everything?

Regards,
PJ
 
If you are using the SW Revsion table you are not able to use a Revision table on each sheet. However if you are using an embedded Excel table. You can do a Edit\Copy, Pick the other sheet and click Edit\Paste

Regards,

Scott Baugh, CSWP [pc2]
3DVision Technologies

faq731-376
faq559-716 - SW Fora Users
 
Why do you want to copy the revision table to all pages? Typically, that information belongs on only one page. Is this your company's standard?
 
Well the way we design and detail our machines, is that we use the same file for the one part on multiple sheets)...For example, importing a chassis onto the first page, and then breaking it down into seperate components on multiple pages within that file. (Hence the trouble with round bars and the 'Relative View' command on one of my other posts.) :|
Anyway, this is why i would like the revision table to be copied throughout all sheets within the same part file without having to re-write everything. Unfortunately we are only running Office 97 with the old Excel pgm, so I cant even try SBaugh suggestion!
 
Every company I've worked at, has had a revision table on each sheet. I'm a firm believer of having all the information pertinent to the component on one sheet.

[cheers] & all the best.
 
I have only seen dwgs with a revision table on the first sheet indicating the revisions of each sheet, not on each sheet. I know military specs require it this way.

Chris
Sr. Mechanical Designer, CAD
SolidWorks 05 SP0.1 / PDMWorks 05
ctopher's home site
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top