Copy -paste special and keep same gesoset hirarchy VBA

[appvid]

Hi Could some one tell me how to keep Model tree structure of geosets while I Copy from one part to another using Paste special as result.

if you copy a geoset that contains geosets and paste as result in a new file, I do not get same structure. But all features are dumped in one geo set
Please see attached image.

thanks
var

 

[m1mason]

That's the whole purpose of pasting as a result is that it will drop the intelligence. You should use paste "As specified in Part Document"
this will bring the history in.


MTM
CSWA Certified
ATC Certified

CAD Blog

http://mtm-cadtutorials.blogspot.com/

Profile

http://www.linkedin.com/in/mtmcad

 

[appvid]

Hmm unfortunatly NO. I want all isolated when copied to new file (geo sets and solid bodies). "As specified in Part Document" will keep the parent-child relations that is nothin gbut creating same file again.

Some times we only copy some elements from Part1 to Part2. (so it has to be as result)

 

[ferdo]

Hi,

Maybe it will be much easier to save as the CATPart with another name and isolate all the features inside the new CATPart created.

Regards
Fernando

https://picasaweb.google.com/102257836106335725208

https://picasaweb.google.com/103462806772634246699/

 

[lardman363]

The picture looked like everything was in order. Was that a picture of the result you want? You may need a code that creates a geoset with the same name, then loops through the hybridshapes and copy/pastes.