Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Copy Chart

Status
Not open for further replies.

rnordquest

New member
Jul 17, 2003
148
I copy an embedded chart from Excel 2003 to Word by selecting the underlying cells then ctl c, paste special, Picture(enhanced metafile). Now for the 1st time in a year when I paste I get the cell gridlines. It's from this file only. The other files I copy from don't have the problem. I compared all the options and made sure they were the same. I get the gridlines whether I use ctl c or shift edit copy. Any ideas?

Thanks,

Roger
 
Replies continue below

Recommended for you

Can you not just select the chart area (click outside the actual graph or titles, so that you select the containing box) and copy/paste that? If you have trouble selecting the chart area, you can pick it from the dropdown box in the Chart toolbar.

Cheers,
Joerd

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
 
I found what it was. Somehow the gridlines box got checked on the Page Setup.

The reason I use the method is there are 2 charts in a specific arrangement perfectly set up to drop into the word doc. If I select them individually they don't look right and trying to make them consistent with the others is too much trouble.

Now I remember even more. I checked the box to print out something else on the sheet last week and I never did that before. I never had reason to futz with it so I feared I screwed it up.

I new it would be something simple and a simple Excel person gave me the answer.

I appreciate your help though.

Thanks,

Roger
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor