Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Copy & Paste using drag box ?

Status
Not open for further replies.
Alan Lowbands

Alan Lowbands

Aerospace
Joined
May 17, 2017
Messages
274
Location
GB
Hi Guys,
Is the any way to cut a number of parts in an assembly by dragging a box over them ?
Is there something I'm missing ?

cheers
Alan
 
Status
Not open for further replies.

Similar threads

Y
  • Locked
  • Question Question
About copy - paste special - copy with link in product
Replies
3
Views
2K
yamaCad
Y
reutov_tv
  • Locked
  • Question Question
Copy-paste with link --> Thread not detected on drawing
Replies
0
Views
300
reutov_tv
reutov_tv
M
  • Locked
  • Question Question
Bounding Box macro
Replies
1
Views
2K
ferdo
ferdo
Ardilla07
  • Locked
  • Question Question
CATIA Copy & Paste Error
Replies
0
Views
642
Ardilla07
Ardilla07
R
Copy part from educative licence
Replies
1
Views
1K
MrCATIA
M

Part and Inventory Search

Sponsor

Back
Top