Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Coordonate system
- Thread starter kthant
- Start date
fredericmenage
Mechanical
Hi,
just open the template file(s) in Solid Edge (C:/Program Files/Solid Edge V20/Templates). Start the command called 'coordinate system' and choose the 'key-in' option then just accept the different steps without changed and the coordinate system should be created at 0,0,0. Save the template file.
Fred
just open the template file(s) in Solid Edge (C:/Program Files/Solid Edge V20/Templates). Start the command called 'coordinate system' and choose the 'key-in' option then just accept the different steps without changed and the coordinate system should be created at 0,0,0. Save the template file.
Fred
- Status
Similar threads