Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

coordinate system

  • Thread starter Thread starter kattur76
  • Start date Start date
Status
Not open for further replies.
K

kattur76

Guest
how to change the default co-ordinate system (cartesian to cylindrical)


in part module
 
I just went through this and I dont' beleive you cancreate a cyl coord sys in part mode. You must be in Mechanica to create a cyl coord sys.


All - please correct and explain how if I'm wrong.
 
Csys made in part mode always display with an X, Y & Z axis When referencing a Csys to make other features or analysis the system can interpret the Csys in 3 ways: Cartesian, Cylindrical or Spherical.
 
Status
Not open for further replies.

Similar threads

T
Help with paint mist extraction systems
Replies
0
Views
7K
technician
T
V
Simulating an Assembly with indivdual co-ord system!!!
Replies
1
Views
3K
srieger
S
A
Exhaust system analysis
Replies
0
Views
2K
avichals
A
T
New Vibration Analysis system
Replies
0
Views
4K
thoenig2
T
R
Mechanism of hydraulic system
Replies
1
Views
4K
Kaz Z06
K

Part and Inventory Search

Sponsor

Back
Top