Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Converting STL files to Solid Geometry
- Thread starter xseng
- Start date
Imported features are 'dumb solids' - in other words, they are a single feature in ProE that cannot be modified or redefined. You can reference surfaces and create features that reference the dumb solid, but there is no method of bringing in neutral files as native, modifiable geometry.
If the source CAD system is either CATIA, Unigraphics or SDRC I-DEAS, there is a company that will translate the CAD model into a native 3D ProE model or assembly for a fee (typically about $140/part).
Recneps
If the source CAD system is either CATIA, Unigraphics or SDRC I-DEAS, there is a company that will translate the CAD model into a native 3D ProE model or assembly for a fee (typically about $140/part).
Recneps
- Status
Similar threads
- Solved
- Question
- Locked
- Question
- Locked
- Question