Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Converting Local Coordinates to global coordinates in Sap 2000

Status
Not open for further replies.
ebram31

ebram31

Structural
Joined
Jul 5, 2013
Messages
1
Location
US
Hello

Would you guys mind let me know is there any way that sap2000 can convert Local coordinates to global coordinates in Link elements ?
I am trying to compare Nodal displacement with link deformation to see if they're working properly, but I can't since both deformation is in local coordinates, and I cannot compare them.

Thanks for the tips in advance
 
Status
Not open for further replies.

Similar threads

N
  • Question Question
SAP 2000 - Center of Mass and Center of Rigidity
Replies
0
Views
6K
Neeka
N
giofed
  • Locked
  • Question Question
SAP 2000 Shell twisting moment
Replies
1
Views
1K
JoshPlumSE
JoshPlumSE
a_urbs
  • Locked
  • Question Question
Using Section Cuts in SAP for Storey Weight
Replies
0
Views
1K
a_urbs
a_urbs
Luca_S
  • Locked
  • Question Question
Unanchored support in SAP 2000
Replies
0
Views
411
Luca_S
Luca_S
K
  • Question Question
C# SAP2000 API v26.2.0 - Load Patterns Not Appearing in "Load Pattern Definitions" Table Despite Being Created
Replies
0
Views
6K
keremsari
K

Part and Inventory Search

Sponsor

Back
Top