Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

converting ABAQUS simulation file to voxel mesh and then export to Hypermesh

Status
Not open for further replies.
willsen

willsen

Mechanical
Joined
Sep 2, 2016
Messages
5
Location
NZ
Hi Everyone,

I am trying to convert my ABAQUS simulation file into voxel mesh which will then be exported to HYPERMESH (for element editing and conversion to other file). Do you have any recommendation on how to do so? Thank you very much
 
Sort by date Sort by votes
Isn't Hypermesh not able to read Abaqus meshes?
 
Upvote 0 Downvote
Hi Mustaine,

Thank you for the reply. Yes it can
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Adil Memet
  • Question Question
Abaqus Metallurgical phase transformations simulation example running problem
Replies
6
Views
8K
Adil Memet
Adil Memet
S
  • Question Question
Stress values are more compared to experimental results and cracks are not formed on concrete for DOUBLE PUNCH TEST simulation in abaqus software
Replies
7
Views
5K
Shreyas M
S
A
  • Locked
  • Question Question
Unstable Reaction Force and Unrealistic Elastic Modulus in Abaqus HPC Simulation
Replies
1
Views
2K
FEA way
FEA way
D
  • Question Question
(ABAQUS) Earlier Failure and Unrealistic Cracking of Reinforced High Strength Concrete Beam Under Bending Simulation
Replies
4
Views
15K
Daniel_LEE
D
K
  • Question Question
Trouble Meshing Imported SolidWorks Part in Abaqus – Need Help with Hex or Hex-Dominated Mesh
Replies
2
Views
12K
Simfinite engineering
Simfinite engineering

Part and Inventory Search

Sponsor

Back
Top