Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Controlnet 1

Status
Not open for further replies.

jjgonzal

Electrical
Joined
Oct 3, 2006
Messages
4
Location
US
I'm losing both A and B controlnet connections what can i do?
 
90% of the problems with ControlNet are bad physical connections, make sure whoever installed the ControlNet Media did a good job.
2nd - it could be a firmware issue between CNB's on the network - Series A's don't play well with Series D's
3rd - RA had faulty T-taps for a while 1786-Tp** anything series A should be returned to RA and replaced -
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top