Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Control Logix analog inputs

Status
Not open for further replies.

panou

Electrical
Apr 21, 2005
33
Hello all.
I want to ask if i can mix single-ended and differential analog input signals in one Control Logix analog input card.
When i tried to do this in an SLC analog input card i had very much noise that dissapeared when disconnecting the differential inputs.
Thanks in advance fro your time.
 
Replies continue below

Recommended for you

panou,

If you are using a 1756-IF8 or 1756-IF16 analog module, you can not mix single-ended and differential modes. All channels on the module must be wired and configured the same way.

Reference Rockwell Automation publication 1756-UM009B-EN-P for everything you need to know about ControlLogix analog modules. Find it at the link below.


(Expand the "I/O" group and select the 1756 ControlLogix I/O link).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor