Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Continuous Casting Modeling on FLUENT

Status
Not open for further replies.
ecelik89

ecelik89

Materials
Joined
Feb 20, 2015
Messages
1
Location
TR
I'm studying on modeling of solidification in continuous casting. There is many literature about that. However I'm not good at FLUENT. What do I have to do? What is the basic steps of using FLUENT on this project.

Thanks
 
Status
Not open for further replies.

Similar threads

R
  • Locked
  • Question Question
Test locations in Steel Casting.
Replies
5
Views
4K
EdStainless
EdStainless
awesomeness
  • Locked
  • Question Question
Thickness of casting gated test block
Replies
2
Views
1K
awesomeness
awesomeness
sta67
  • Locked
  • Question Question
DIN steel casting test coupon
Replies
5
Views
2K
ShataCastings
ShataCastings
AjSCCMelt
  • Locked
  • Question Question
Seeking Advice on Optimal Chemical Composition for Tooth Adaptor Casting in HEMM Buckets.
Replies
14
Views
1K
jessieleo99
jessieleo99
Saad M.M.
  • Locked
  • Question Question
Stainless steel pipe continuous solution annealing by induction heating
Replies
2
Views
2K
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top