2MG hydropillar style water tank will be blasted and recoated inside and out. Two containment systems have been proposed: the totally enclosed painting environment (TEPE) system with outriggers, rings and curtain, limited to deployment in winds 20mph or lower, and a scaffolding/shrink wrap system good to 50mph that provides 100% weatherproof containment. It is also estimated to be 4 times more expensive than the curtain. (150k v 570k). I am familiar with the curtain, but not the shrinkwrap. Anyone have any experience with it? Could mitigate some risk we have with adjacent structures, or so we are told.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Containment for blasting and painting water tower
- Thread starter sewerratt
- Start date
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question