Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Contact set For Dynamic Analysis???

Status
Not open for further replies.
kar99429

kar99429

Mechanical
Joined
Nov 3, 2011
Messages
12
Location
FR
HI everyone,
I need to create contact for two surfaces that are in contact.
I am using I-deas SDRC for this simulation.
I am able to create contact set in linear statics solving.
My question is ..Is it possible to create contact set during dynamic analyis(REsponse Dynamics ) in I-deas software.. If not Why?

Please clarify .. Thanks in Advance
 
Status
Not open for further replies.

Similar threads

Stress_Eng
  • Locked
  • Question Question
FEM Contact Analysis Variables
Replies
17
Views
14K
Stress_Eng
Stress_Eng
Kamyar_K
  • Question Question
How to get uniform tension in a rail using dynamic/explicit analysis?
Replies
6
Views
9K
rb1957
rb1957
M
  • Question Question
FEA Frame Analysis (bolted and welded connections) of a skid.
Replies
1
Views
7K
rb1957
rb1957
G
  • Question Question
FEA Simulation of a Piezoelectric Accelerometer with Frequency Response Analysis
Replies
2
Views
9K
gnana_235
G
T
Thermal load with thermal gradient in a structure analysis with FEM
Replies
1
Views
429
SWComposites
SWComposites

Part and Inventory Search

Sponsor

Back
Top