Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Contact element in user define material

Status
Not open for further replies.
jiligeo

jiligeo

Geotechnical
Joined
Feb 24, 2005
Messages
145
Location
DE
Is it possible to use contact elements (conta174, targe170) in user define material (using UPF)? As I find in ANSYS help manual (8.3.1.3. User Defined Material) it is not possible!
How is that in ABAQUS?
Thanks
 
Status
Not open for further replies.

Similar threads

T
  • Question Question
Accessing Named Selections of Contact Surfaces via CMSEL After Applying Condensed Geometry Not Possible
Replies
0
Views
5K
TOM1345
T
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
andradesilva
  • Locked
  • Question Question
How to change element type in ANSYS Workbench 2023 R1
Replies
1
Views
1K
SPDL310
SPDL310
md_salem
  • Locked
  • Question Question
Hello everyone, How to define an e
Replies
0
Views
201
md_salem
md_salem
H
  • Locked
  • Question Question
Plasticity behaviour is not being computed in a non-linear analysis in ANSYS Mechanical APDL 2024 r2
Replies
0
Views
2K
hmsilva
H

Part and Inventory Search

Sponsor

Back
Top