Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Contact between line body and solid body in Workbench

Status
Not open for further replies.
wklim7

wklim7

Mechanical
Joined
Aug 28, 2012
Messages
2
Location
AU
Hi,

I'm trying to bond a line body to a solid plate in such a way that when I load the plate strains get transferred over to the line body.

However no strain seems to be transferring over to the line body.

Can anyone help me with this?

Thanks.
Ken
 
Status
Not open for further replies.

Similar threads

struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
4K
struclearner
struclearner
IJR
  • Locked
  • Question Question
On how and where to insert command snippets inside Workbench mechanical
Replies
2
Views
2K
IJR
IJR
struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
md_salem
  • Locked
  • Question Question
how to assign material to auto-generated body in ANSYS 22R1 workbench ?
Replies
1
Views
567
jkupka84
jkupka84

Part and Inventory Search

Sponsor

Back
Top