Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Contact analysis

Status
Not open for further replies.
asvipin

asvipin

Mechanical
Joined
Nov 27, 2014
Messages
36
Location
IN
I want to model tightening of a bolted joint.After defining the contact, how tightening of nut can be defined. How the torque requirement can be evaluated?
 
Sort by date Sort by votes
Convert the torque into a axial force and see Abaqus/CAE Manual 22. Bolt loads
 
Upvote 0 Downvote
I want to evaluate the torque required for producing specified axial tension in the bolt.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

mj345
  • Question Question
Dynamic analysis
Replies
1
Views
4K
FEA way
FEA way
SinaPeugeot
  • Question Question
Applying contact pressure between two parts
Replies
2
Views
9K
SinaPeugeot
SinaPeugeot
mj345
  • Locked
  • Question Question
contact generation
Replies
2
Views
12K
mj345
mj345
G
  • Locked
  • Question Question
Abaqus explicit - general contact problem
Replies
5
Views
15K
FEA way
FEA way
E
  • Locked
  • Question Question
CONTACT IN MERGED PARTS
Replies
7
Views
13K
EbrahimGamaleldin
E

Part and Inventory Search

Sponsor

Back
Top