Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

construction roving of glass fiber

Status
Not open for further replies.
suzanparvez

suzanparvez

Mechanical
Joined
May 26, 2006
Messages
28
Location
CA
Is there any sensor or optical instrument or any other instrument avaliable to detect any loose strand on the bobbin at the time of roving. Since for the operators it is always not possible to see constantly the bobbin being made so we are having problem in the production using bobbing with loose strand and so forth.

can you guys pls. suggest a way or instrument which can detect this problem automatically ?
 
Status
Not open for further replies.

Similar threads

S
  • Locked
  • Question Question
Transverse Properties of Carbon Fiber
Replies
5
Views
4K
Compositepro
Compositepro
Cisnerjo
  • Locked
  • Question Question
Plaster Mandrels alternative materials for washout mandrels (fiber glass air ducts)
Replies
2
Views
1K
Cisnerjo
Cisnerjo
blakmax
  • Locked
  • Question Question
Passing of John Hart-Smith
Replies
2
Views
3K
fbdandloadpath
fbdandloadpath
Oluwakay
  • Locked
  • Question Question
HOW TO OBTAIN ORTHOTROPIC PARAMETERS FOR A FIBER REINFORCED COMPOSITE
Replies
2
Views
1K
Oluwakay
Oluwakay
kevlar49
  • Locked
  • Question Question
Finding manufacturers of titanium metal matrix composites
Replies
0
Views
344
kevlar49
kevlar49

Part and Inventory Search

Sponsor

Back
Top