Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Constrains equation for heat transfer and electric analysis

Status
Not open for further replies.
lambert8809

lambert8809

Aerospace
Joined
Nov 13, 2016
Messages
2
Location
US
Dear All,

I want to perform a RVE analysis using ABAQUS to get effective properties. I know how to applied periodic boundary conditions for mechanical problems to get elastic properties of the RVE, but now I want to do heat transfer and electric analysis with the same RVE. I guess I cannot use dof 1-3 in the equations to couple temperature for heat transfer or electric potential, then how can I solve the problems? Any suggestions or comments are great appreciate.


Thanks
Xin
 
Status
Not open for further replies.

Similar threads

FEA_User
  • Locked
  • Question Question
Heat transfer analysis with abaqus
Replies
5
Views
821
FEA way
FEA way
mj345
  • Question Question
Dynamic analysis
Replies
1
Views
4K
FEA way
FEA way
L
  • Locked
  • Question Question
VUSDFLD subrotine ABAQUS : Varying Young's Modulus with an equation
Replies
1
Views
2K
FEA way
FEA way
Hossein3ds
  • Question Question
Error during Thermo-mechanical Analysis
Replies
1
Views
3K
FEA way
FEA way
R
  • Locked
Abaqus: transferring solution field from one instance to another between steps within same analysis.
Replies
2
Views
4K
Ron_ron
R

Part and Inventory Search

Sponsor

Back
Top