Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Constrain change after giving first part to second pattern

  • Thread starter Thread starter thilag1981
  • Start date Start date
T

thilag1981

Guest
Hello Friends

Nx Version : Nx 9 / Nx 11 both Teamcenter Integerated.
Nx Module : Assembly

If have assembled a bolt with flange by selecting the bolt cylindrical surface first then flange hole cylindrical surface next then a constraint with Touch Bolt file name and Flange file name will be displayed.

Now after created this constrain if any ways to change the naming from ` Touch Bolt file name and Flange file name’ to ` Touch Flange file name and Bolt file name’.

Regards

thilag
 
You must log in or register to reply here.

Similar threads

nyang
  • Question Question
Moving body from part back to assembly level part
Replies
3
Views
12K
Toost
Toost
CAD2015
  • Question Question
Convert components from an assembly into one single part.......
Replies
5
Views
7K
CAD2015
CAD2015
s_hightower
  • Locked
  • Question Question
NX Assembly Part Family
Replies
1
Views
822
Werner K
Werner K
E
  • Question Question
Hide line lables in assembly
Replies
2
Views
6K
Emer4ld
E
CAD2015
  • Locked
  • Question Question
Get to the part location from the tree...................
Replies
5
Views
5K
NXGeek
N

Part and Inventory Search

Sponsor

Back
Top